--- title: "Preferences" slug: "preferences" updated: 2024-11-18T21:02:25Z published: 2024-11-18T21:02:25Z canonical: "document360.traceablelive.com/preferences" --- > ## Documentation Index > Fetch the complete documentation index at: https://document360.traceablelive.com/llms.txt > Use this file to discover all available pages before exploring further. # Preferences ## Preferences The **Preferences** option consists of menus that allow users to set up the device according to their preferences, including options for **Display**, **Alerts** & **Notifications**, **Device Setup**, and **Units**. IMPORTANT! When saving any device configuration, the changes will only be saved on the device. To sync these changes with the cloud, tap on the *Home* icon displayed at the top middle of the screen. Ensure that the device is connected to both Wi-Fi and Power to view all the updated settings on your Traceable LIVE® account. --- To access the **Preferences** option navigate to the settings menu by tap on the *Settings Icon* from the home screen. ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2868%29.png) Select **Preferences** to view further options ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2869%29.png) --- ### Display In the **Display Settings** screen, users can customize their device display ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2876%29.png) - **Clock Format**: Choose between a 12-hour or 24-hour clock format. The time on the top left corner of the device will be displayed according to the selected format. - **Sleep Settings**: Select when the display should turn off, such as keeping the screen always on. The other options are 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, and 10 minutes. - **Screen Brightness**: Adjust the screen brightness from 20% to 100%. - **LED Brightness**: Control the *Status Light* brightness from 0% to 100%. ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2893%29.png) --- ### Alerts & Notifications In the **Alerts & Notifications** screen, users can customize **Probe Alarms**, **Sensor Alarm**, **Defrost Delay** & **Volume Setting**. ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2877%29.png) #### Probe Alarms In **Probe Alarms**, users can set a delay for the alarm alert for Probe 1 and Probe 2. *The delay can be set between 0 to 60 minutes.* ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2880%29.png) #### Sensor Alarms In **Sensor Alarms**, users can set a delay for the alarm alert for Sensor 1 and Sensor 2. *The delay can be set between 1 minute to 60 minutes.* ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2881%29.png) #### Defrost Delay The **Defrost Delay** option allows the user to suppress the alarm during routine maintenance of the refrigerator. The user can enter a desired delay time and select **START** to initiate the delay. A countdown will then display on the device, and the alarm will remain suppressed for the set duration. The user can stop the countdown at any time by selecting **STOP**. *The defrost delay can be set between 1 minute to 720 minutes.* ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2882%29.png) WARNING During the **Defrost Delay** process, the device will not log any data or report any alerts, such as if the door is open or the temperature is out of range. #### Volume Setting In the **Volume Setting** screen, users can adjust the alarm or alert volume by sliding the control from 0% (muted) to 100% (maximum volume). ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2883%29.png) ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2894%29.png) --- ### Device Setup The **Device Setup** allows users to personalize their device setup by configuring the basic settings and probe names ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2884%29.png) - **Device Name**: User can enter a unique name for the device. This name will be used to identify the device within the system. - **Orientation**: Select the desired display orientation for the device. Options include Portrait or Landscape mode. - **Language**: Choose the preferred language for the device interface. Options include English, Spanish, German & French. - **Probe 1 Name / Probe 2 Name**: User can enter names for the attached probes. - **Sensor 1 Name / Sensor 2 Name**: These fields display the names of the sensors connected to the device. The names for Sensor 1 and Sensor 2 cannot be changed and will always be displayed as Sensor 1 and Sensor 2, respectively. --- ### Units The **Units** feature allows users to select the preferred temperature measurement unit on the device. You can choose between Celsius (°C) and Fahrenheit (°F) as per your needs. ![image.png](https://cdn.document360.io/dfe4b53c-b7e1-4f35-a0d5-71d402b5aa27/Images/Documentation/image%2886%29.png)